8-328NOTICEECB00560The drive chain must be lubricated after wash-ing the ATV or riding in the rain.1. Clean the drive chain with kerosene and asmall soft brush.NOTICEECB00570To prevent damaging the O-rings, do not cleanthe drive chain with steam cleaners, high-pres-sure washers or inappropriate solvents.2. Wipe the drive chain dry.3. Thoroughly lubricate the drive chain with aspecial O-ring chain lubricant.NOTICEECB00580Do not use engine oil or any other lubricantsfor the drive chain, as they may contain sub-stances that could damage the O-rings.EBU24900Checking and lubricating the cablesThe operation and the condition of all control ca-bles should be checked before each ride, and thecables and cable ends should be lubricated if nec-essary. If a cable is damaged or does not movesmoothly, have a Yamaha dealer check or replaceit.WARNINGEWB02130Inspect cables frequently and replace if dam-aged. Corrosion can result when the cablesheaths become damaged, and cables canalso become frayed or kinked, which could re-strict the operation of controls and lead to anaccident or injury.1. O-ringRecommended lubricant:Engine oil
