Yamaha YHT-393 Owner's Manual

Also see for YHT-393: Owner's manual Owner's manual

Contents

En 36PLAYBACKPlaying back tunes from Bluetooth™ componentsUsing Bluetooth™ componentsWhen pairing is complete, carry out the followingprocedure to achieve a wireless connection between thisunit and the Bluetooth component. When the wirelessconnection is complete, you playback from Bluetoothcomponents.1 Press dDOCK to switch to the DOCK input.2 Press qOPTION to display the Optionmenu.3 Use jCursor B / C to select “Connect” andpress jENTER. J14 Operate the Bluetooth component forplayback.dDOCKjCursor B / CjENTERqOPTIONOPTIONENTERDOCK7 85 69 0 101 2 3 4RECENTTVTV VOL TV CHINPUTMUTERECEIVERSCENESETUPRETURNVOLUMEENHANCER SUR. DECODESTRAIGHTHDMIAVAUDIOTRANSMITSLEEP1 2 3 41 2 3 41 25V-AUXTUNERFMINFO MEMORYAMPRESET TUNINGMOVIE MUSIC STEREOBDDVD TV CD RADIOMUTETOPMENU POP-UPMENUDISPLAYSOURCECODE SET[ A ] [ B ]qjdDepending on Bluetooth components, a wirelessconnection is established automatically or byoperating the Bluetooth components. In that case, it isnot necessary to carry out the following procedure.“Not found” is displayed when there is an errorconnecting. Check that the following conditions havebeen satisfied, and try to establish a wirelessconnection again.• Both this unit and the Bluetooth component are paired.• The Bluetooth component is switched on.• The Bluetooth component is within 32 feet (10 meters)of the Bluetooth wireless audio receiver.To disconnect a wireless connection, repeat the samesteps, and in step 3, select “Disconnect.”SWCLSL SRRBTconnectedDOCK VOL.When wireless connection is completeJ 1 : “Disconnect” is displayed when a Bluetooth component has beenconnected.