Yamaha YHT-393 Owner's Manual

Also see for YHT-393: Owner's manual Owner's manual

Contents

En 50SETUPYou can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.Selecting input source connected to DVDplayerSelecting input source connected to CDplayerKeys connecting externalcomponentscSOURCE ASwitches an external component on and off.jCursor, jENTER, jRETURNOperates the menus of external components.kDISPLAYSwitches an external component display.kExternal component operation keysFunctions as a recording or playback key of an externalcomponent, or a menu display key.lNumeric keysFunctions as numeric keys of an external component.mTV control keys J1Default remote control codesettingsThe following remote control codes are assigned to inputsources as factory default settings. For a complete list ofavailable remote control codes, please refer to “RemoteControl Code Search” in the CD-ROM.Controlling other components with the remote controlcSOURCE AdInput selectoriSETUPjCursor B / C / D / EjENTERjRETURNkExternal componentoperation keyskDISPLAYlNumeric keysmTV control keysmINPUTmMUTEmTV VOL +/-mTV CH +/-mAqOPTIONOPTIONSETUPRETURNHDMIAVAUDIO1 2 3 41 2 3 41 25V-AUXTUNERENTER7 85 69 0 101 2 3 4RECENTTVTV VOL TV CHTOPMENU POP-UPMENUDISPLAYSOURCEINPUTMUTEDOCK[ A ] [ B ]RECEIVERSCENEVOLUMEENHANCER SUR. DECODESTRAIGHTTRANSMITSLEEPFMINFO MEMORYAMPRESET TUNINGMOVIE MUSIC STEREOBDDVD TV CD RADIOMUTECODE SETqmlkjicdIf you are unable to operate this unit after operating anexternal component, press iSETUP or qOPTIONand then try operating the remote control again.Playback/StopDVD playerCD playerPlayback/StopDVD playerCD playerThe remote control keys for controlling externalcomponents are available only when the externalcomponents have corresponding control keys.mINPUT Switches video inputs of TVmMUTE Mutes TV volume temporarily.mTV VOL +/- Controls the volume of TVmTV CH +/- Switches TV channels.mA Turns on and off TVInput Category Manufacturer Remotecontrol codeHDMI1 Blu-rayplayer/recorderYamaha 2064HDMI2 — — —HDMI3 — — —HDMI4 — — —AV1 — — —AV2 — — —AV3 CD player Yamaha 5095AV4 — — —AV5 — — —AUDIO1 — — —AUDIO2 — — —V-AUX — — —A/B J2 — — —DOCK DOCK Yamaha 5089TUNER Tuner Yamaha 5085J 1 : You can register remote control codes for external components todInput selector and remote control codes for TVs in mA(mTV control keys).To register a TV remote control code to dInput selector:You can use the jCursor, lNumeric keys, and mTVcontrol keys to control a TV you have registered.To register a remote control code for a device other than a TV todInput selector:You can use the jCursor and lNumeric keys etc to controlexternal components, and the mTV control keys to controlTVs registered in mA.J 2 : Use A/B for external component operations only. Set these keys toremote control codes if you want to perform external componentoperations without linking to input source selection of this unit.For example, it may be convenient to assign remote control codesfor devices such as TVs.