INSTRUMENT AND CONTROL FUNCTIONS3-732. Place the seat in the original posi-tion, and then tighten the bolts.NOTE:Make sure that the seat is properly se-cured before riding.EAU41470Adjusting the front forkThis front fork is equipped with rebounddamping force adjusting screws andcompression damping force adjustingscrews.WARNINGEWA10180Always adjust both fork legs equal-ly, otherwise poor handling and lossof stability may result.Rebound damping forceTo increase the rebound damping forceand thereby harden the rebound damp-ing, turn the adjusting screw on eachfork leg in direction (a). To decrease therebound damping force and therebysoften the rebound damping, turn theadjusting screw on each fork leg in di-rection (b).Compression damping force1. Remove the rubber cap by pullingit out of the front fork leg.1. Projection2. Seat holder1. Rebound damping force adjusting screwRebound damping setting:Minimum (soft):20 click(s) in direction (b)*Standard:7 click(s) in direction (b)*Maximum (hard):1 click(s) in direction (b)** With the adjusting screw fully turnedin direction (a)1. Rubber cap2. Compression damping force adjusting screw