PERIODIC MAINTENANCE AND MINOR REPAIR6-276EAU24360Front wheelEAU41340To remove the front wheelWARNINGEWA10820 It is advisable to have a Yamahadealer service the wheel. Securely support the motor-cycle so that there is no dangerof it falling over.1. Loosen the axle nut.2. Lift the front wheel off the groundaccording to the procedure onpage 6-26.3. Remove the axle nut and washer.4. Pull the wheel axle out, and thenremove the wheel.EAU41420To install the front wheel1. Lift the wheel up between the forklegs.2. Insert the wheel axle from the rightside.3. Lower the front wheel so that it ison the ground.4. Install the washer and axle nut,and then tighten the axle nut to thespecified torque.EAU25080Rear wheelEAU41310To remove the rear wheelWARNINGEWA10820 It is advisable to have a Yamahadealer service the wheel. Securely support the motor-cycle so that there is no dangerof it falling over.1. Loosen the axle nut.2. Lift the rear wheel off the groundaccording to the procedure onpage 6-26.3. Loosen the locknut and drive chainadjusting bolt on each side of theswingarm.4. Remove the axle nut and washer.1. Washer2. Axle nut1. Wheel axleTightening torque:Axle nut:70 Nm (7.0 m·kgf, 50 ft·lbf)