INSTRUMENT AND CONTROL FUNCTIONS3-143RightEAU12370Pass switch “PASS”Press this switch to flash the head-lights.EAU12400Dimmer switch “ / ”Set this switch to “ ” for the highbeam and to “ ” for the low beam.EAU12460Turn signal switch “ / ”To signal a right-hand turn, push thisswitch to “ ”. To signal a left-handturn, push this switch to “ ”. When re-leased, the switch returns to the centerposition. To cancel the turn signallights, push the switch in after it has re-turned to the center position.EAU12500Horn switch “ ”Press this switch to sound the horn.EAU12660Engine stop switch “ / ”Set this switch to “ ” before startingthe engine. Set this switch to “ ” tostop the engine in case of an emergen-cy, such as when the vehicle overturnsor when the throttle cable is stuck.EAU12710Start switch “ ”Push this switch to crank the enginewith the starter.CAUTION:ECA10050See page 5-1 for starting instruc-tions prior to starting the engine.EAU12731Hazard switch “ ”With the key in the “ON” or “ ” posi-tion, use this switch to turn on the haz-ard light (simultaneous flashing of allturn signal lights).The hazard light is used in case of anemergency or to warn other driverswhen your vehicle is stopped where itmight be a traffic hazard.CAUTION:ECA10060Do not use the hazard light for an ex-tended length of time, otherwise thebattery may discharge.1. Engine stop switch “ / ”2. Start switch “ ”