INSTRUMENT AND CONTROL FUNCTIONS3-83 a speedometer (which shows theriding speed) a tachometer (which shows enginespeed) an odometer (which shows the to-tal distance traveled) two tripmeters (which show thedistance traveled since they werelast set to zero) a fuel reserve tripmeter (whichshows the distance traveled sincethe fuel level warning light cameon) a stopwatch a clock a coolant temperature display an air intake temperature display a self-diagnosis device a display brightness and shift tim-ing indicator light control modeNOTE: Be sure to turn the key to “ON” be-fore using the “SELECT” and “RE-SET” buttons. For the U.K. only: To switch thespeedometer and odometer/trip-meter displays between kilometersand miles, press the “SELECT”button for at least one second.TachometerThe electric tachometer allows the riderto monitor the engine speed and keep itwithin the ideal power range.When the key is turned to “ON”, the ta-chometer needle will sweep onceacross the r/min range and then returnto zero r/min in order to test the electri-cal circuit.CAUTION:ECA10031Do not operate the engine in the ta-chometer red zone.Red zone: 13750 r/min and aboveClock modeTurn the key to “ON”.To set the clock1. Push the “SELECT” button and“RESET” button together for atleast two seconds.2. When the hour digits start flashing,push the “RESET” button to set thehours.1. Tachometer2. Tachometer red zone1. Clock2. Speedometer
