PERIODIC MAINTENANCE AND MINOR REPAIR6-3863. Remove the defective bulb by pull-ing it out.4. Insert a new bulb into the socket.5. Install the socket (together with thebulb) by pushing it in.6. Install the license plate light unit byinstalling the screws.EAU33910Replacing an auxiliary lightbulbThis model is equipped with two auxil-iary lights. If an auxiliary light bulb burnsout, replace it as follows.1. Remove panel C (if replacing theleft auxiliary light bulb) or panel D(if replacing the right auxiliary lightbulb). (See page 6-6.)2. Remove the auxiliary light bulbcover by removing the quick fas-tener.NOTE:Remove the quick fastener by pushingthe center pin in with a screwdriver,then pulling the fastener out.3. Remove the socket (together withthe bulb) by pulling it out.4. Remove the defective bulb by pull-ing it out.5. Insert a new bulb into the socket.6. Install the socket (together with thebulb) by pushing it in.1. Auxiliary light bulb cover2. Quick fastener1. Auxiliary light bulb socket1. Auxiliary light bulb
