Yamaha YZFR1W(C) Owner's Manual

Also see for r1 2008: Service manual

Contents

INSTRUMENT AND CONTROL FUNCTIONS3-93CAUTION:ECA11590If the display indicates an errorcode, the vehicle should be checkedas soon as possible in order to avoidengine damage.Display brightness and shift timingindicator light control modeThis mode cycles through five controlfunctions, allowing you to make the fol-lowing settings in the order listed be-low. Display brightness:This function allows you to adjustthe brightness of the displays andtachometer to suit the outsidelighting conditions. Shift timing indicator light activity:This function allows you to choosewhether or not the indicator lightshould be activated and whether itshould flash or stay on when acti-vated. Shift timing indicator light activa-tion:This function allows you to selectthe engine speed at which the indi-cator light will be activated. Shift timing indicator light deactiva-tion:This function allows you to selectthe engine speed at which the indi-cator light will be deactivated. Shift timing indicator light bright-ness:This function allows you to adjustthe brightness of the indicator lightto suit your preference.NOTE:In this mode, the right display showsthe current setting for each function(except the shift timing indicator lightactivity function).To adjust the brightness of the multi-function meter displays and tachometer1. Turn the key to “OFF”.2. Push and hold the “SELECT” but-ton.3. Turn the key to “ON”, and then re-lease the “SELECT” button afterfive seconds.4. Push the “RESET” button to selectthe desired brightness level.5. Push the “SELECT” button to con-firm the selected brightness level.The control mode changes to theshift timing indicator light activityfunction.To set the shift timing indicator light ac-tivity function1. Push the “RESET” button to selectone of the following indicator lightactivity settings:1. Display brightness2. Shift timing indicator light activation/deacti-vation3. Shift timing indicator light4. Brightness level