Yealink CP920 Quick Start Manual

Also see for CP920: Administrator's guide Auto provisioning guide How to configure Getting started Recovery guide

Contents

Yealink CP920 Quick Start Manual Manual pdf 28 page image

Yealink CP920 User Guide24l Push Button Configuration (PBC): The user simply has to press the WPS key on both the IP phone and gate-way/router to connect.l Personal Identification Number (PIN): The user enters the PIN generated randomly by the IP phone on the gate-way/router to connect.Before You BeginMake sure that the Wi-Fi mode is activated.Push Button Configuration (PBC)Procedure1. Navigate to Menu->Settings->Basic Settings->Wi-Fi.2. Tap WPS, and then select WPS.The phone screen prompts “WPS has been activated, connect in 120s!”.3. Long press the WPS key on your gateway or router.Once the WPS setup has completed successfully, the phone screen will prompt “Connect Success.”.Personal Identification Number (PIN)Procedure1. Navigate to Menu->Settings->Basic Settings->Wi-Fi.2. Tap WPS, and then select WPS-PIN.The phone screen prompts “Please input below PIN code on your Wi-Fi router and press OK to connect: xxx”.3. Log into your gateway or router’s web interface, and configure it to search the clients. For more information, referto the documentation from the gateway or router manufacturer.Once WPS-PIN setup has completed successfully, the web interface of the gateway or router will prompt the con-nection is successful.Related TopicActivating the Wi-Fi ModeAdding a Wireless Network ManuallyIf SSID broadcast on your gateway or router is disabled, the wireless network might not appear in the scanning results.In that case, you must manually add a wireless network. The connected wireless networks will be saved to Known Net-work(s) list.Before You BeginGet the available wireless network information from your system administrator. Make sure that the Wi-Fi mode is activ-ated. The Known Network(s) list can store up to 5 wireless networks.Procedure1. Navigate to Menu->Settings->Basic Settings->Wi-Fi.2. Highlight Known Network(s), and then tap Add.3. Use the WLAN settings obtained from your gateway/router to configure this WLAN Profile on the IP phone. Do thefollowing:l If you select None or WEP from the Security Mode field, enter the desired values in the corresponding fields.