Advanced Features73Before You BeginYour system administrator has enabled the group call pickup and set the group call pickup code.Procedure1. TapThe GPickup appears on the phone screen.2. Tap GPickup on your phone when any phone in the group receives an incoming call.The call is answered on your phone.Related TopicPicking up a Call with a Group Pickup KeyCall Park and Call RetrieveYou can use this feature to park a call, and then retrieve the call either from your phone or another phone. After youpark a call, the call is placed on hold, you can continue the conversation after retrieving it.The IP phone supports this feature under the following modes:l FAC mode: park the call to the local extension or a desired extension through dialing the park code.l Transfer mode: park the call to the shared parking lot through a blind transfer. For some servers, the system willreturn a specific retrieve park number (park retrieve code) from which the call can be retrieved after parking suc-cessfully.NoteCall park is not available on all servers. Check with your system administrator to find out if it is available on your phone.TopicsParking or Retrieving a Call in the FAC ModeParking or Retrieving a Call in the Transfer ModeParking or Retrieving a Call in the FAC ModeYour system administrator sets the FAC mode in which you can park and retrieve a call on your phone.TopicsParking a CallRetrieving a Parked Call in the FAC ModeParking a CallBefore You BeginYour system administrator has set call park in the FAC mode.Procedure1. During a call, tap Park (You may need to tap the More soft key to see the Park soft key).The phone will dial the call park code which is pre-configured.2. Do one of the following:
