Yealink CP920 User Guide621. Tap Hold to place the conference on hold.2. Tap Resume to resume the held conference call.Muting or Unmuting a Conference CallYou can mute the local microphone during a conference call so that the other participants can hear each other exceptyou.Procedure1. Tap the Mute touch key to mute the conference.2. Tap the Mute touch key again to unmute the conference.Splitting a Conference CallYou can split the conference call into individual calls. After you split a conference call, the conference call ends, andother parties are held. You can resume one of the hold calls.Procedure1. Tap Manage.2. Tap More, and then tap Split All.Managing Conference ParticipantsYou can manage conference participants in the following ways:l Mute a participantl Hold a participantl Remove a participant from the conferenceProcedurel Tap Far Mute to mute the party. The muted party can hear everyone, but no one can hear the muted party.l Tap Far Hold to hold the party. The held party cannot hear anyone, and no one can hear the held party.l Tap Remove to remove the party from the conference call.l Tap More, and then tap Back to return to the previous screen.Ending a Conference CallBy default, other parties drop the call when you end the conference call. However, your system administrator can setup that the other two parties remain connected when you end the conference call.Procedure1. Tap End Call to drop the conference call.Network ConferenceIf your system administrator has set a network conference feature on your phone, you can initiate a conference withmultiple participants.TopicSetting Up a Network ConferenceSetting Up a Network ConferenceProcedure
