Yealink CP920 Quick Start Manual

Also see for CP920: Administrator's guide Auto provisioning guide How to configure Getting started Recovery guide

Contents

Yealink CP920 Quick Start Manual Manual pdf 78 page image

Yealink CP920 User Guide74l If you want to park the call against the local extension, tap the # key.l If you want to park the call against the desired extension, enter the extension (for example, 4606) where youwant to park the call and tap the # key.If the call is parked successfully, you will hear a voice prompt that the call is parked.Retrieving a Parked Call in the FAC ModeBefore You BeginYour system administrator has set call park in the FAC mode. There is a call parked on the extension.Procedure1. Tap Retrieve (You may need to tap the More soft key to see the Retrieve soft key) on the pre-dialing screen.The phone will dial the park retrieve code which is configured in advance.2. Follow the voice prompt to retrieve:l Tap the # key on the phone where the call is parked.l Enter the desired extension followed by # (for example, 4606#) on any phone.Parking or Retrieving a Call in the Transfer ModeYour system administrator has set the Transfer mode in which you can park and retrieve a call on your phone.TopicsParking a Call in the Transfer ModeRetrieving a Parked Call in the Transfer ModeParking a Call in the Transfer ModeBefore You BeginYour system administrator has set call park in the Transfer mode.Procedure1. During a call, tap Park (You may need to tap the More soft key to see the Park soft key).The call will be directly transferred to the shared parking lot.Retrieving a Parked Call in the Transfer ModeBefore You BeginYour system administrator has set call park in the Transfer mode. There is a call parked on the shared parking lot.Procedure1. Tap Retrieve (You may need to tap the More soft key to see the Retrieve soft key) on the pre-dialing screen.The phone will retrieve the parked call from the shared parking lot.Shared LineYealink IP phone supports using Shared Call Appearance (SCA) or Bridged Line Appearance (BLA) to share a line. Sothat this line can be registered on more than one IP phone at the same time.Your system administrator can set your phone to use the shared line.