Administrator’s Guide for SIP-T5 Series Smart Media Phones292Parameters Permitted Values DefaultSettings->Features->Auto Redial->Redial TimesTo configure auto redial via web user interface:1. Click on Features->General Information.2. Select the desired value from the pull-down list of Auto Redial.3. Enter the waiting time in the Auto Redial Interval (1~300s) field.The default value is 10.4. Enter the desired times in the Auto Redial Times (1~300) field.The default value is 10.5. Click Confirm to accept the change.To configure auto redial via phone user interface:1. Tap Settings->Features->Auto Redial.2. Tap the On radio box in the Auto Redial field.3. Enter the waiting time (in seconds) in the Redial Interval field.4. Enter the desired times in the Redial Times field.5. Tap to accept the change.Auto AnswerAuto answer allows IP phones to automatically answer an incoming call. IP phones will notautomatically answer the incoming call during a call even if auto answer is enabled. Auto answeris configurable on a per-line basis. Auto-Answer delay defines a period of delay time before theIP phone automatically answers incoming calls.Auto Answer ToneAuto answer tone allows the IP phone to play a tone when an incoming call is automaticallyanswered. You can customize the auto answer tone or select specialized tone sets (vary fromcountry to country) for your IP phone. For more information, refer to Tones on page 614.
