Configuring Advanced Features363You can also enable no answer forward for all accounts. Do the following:1) Tap , and then tap All Lines.The touch screen prompts “Copy to all lines?”.2) Tap OK to accept the change or Cancel to cancel.5. Tap , and then tap Save to accept the change.To configure forward international via phone user interface:1. Tap Settings->Advanced (default password: admin) ->FWD International.2. Tap the FWD International field.3. Tap the desired value in the pop-up dialog box.4. Tap to accept the change.Call TransferCall transfer enables IP phones to transfer an existing call to a third party. For example, if party Ais in an active call with party B, party A can transfer this call to party C (the third party). Then,party B will begin a new call with party C and party A will disconnect.IP phones support call transfer using the REFER method specified in RFC 3515 and offer threetypes of transfer: Blind Transfer -- Transfer a call directly to another party without consulting. Blind transferis implemented by a simple REFER method without Replaces in the Refer-To header. Semi-attended Transfer -- Transfer a call after hearing the ringback tone. Semi-attendedtransfer is implemented by a REFER method with Replaces in the Refer-To header. Attended Transfer -- Transfer a call with prior consulting. Attended transfer isimplemented by a REFER method with Replaces in the Refer-To header.Normally, call transfer is completed by tapping the transfer key. Blind transfer on hook andattended transfer on hook features allow the IP phone to complete the transfer throughon-hook. Blind transfer on hook and attended transfer on hook features are not applicable toCP960 IP phones.When a user performs a semi-attended transfer, semi-attended transfer feature determineswhether to display the prompt "n New Missed Call(s)" ("n" indicates the number of the missedcalls) on the destination party’s phone touch screen.
