Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones148Configuration ParametersThe following table lists the configuration parameters used to determine the phone behavior forkeeping user personalized settings:Parameters Permitted Values Defaultstatic.auto_provision.custom.protect 0 or 1 0Description:Enables or disables the IP phone to keep user personalized settings after auto provisioning.0-Disabled1-EnabledIf it is set to 1 (Enabled), -local.cfg file generates and personalized non-static settingsconfigured via web or phone user interface will be kept after auto provisioning.Note: The provisioning priority mechanism (phone/web user interface >centralprovisioning >factory defaults) takes effect only if the value of this parameter is set to 1(Enabled). If the value of the parameter “overwrite_mode” is set to 1 in the boot file, thevalue of this parameter will be forced to set to 1 (Enabled).Web User Interface:NonePhone User Interface:Nonestatic.auto_provision.custom.sync 0 or 1 0Description:Enables or disables the IP phone to upload the -local.cfg file to the server each timethe file updates, and download the -local.cfg file from the server during autoprovisioning.0-Disabled1-EnabledIf it is set to 1 (Enabled), the IP phone will upload the -local.cfg file to theprovisioning server or a specific server each time the file updates to back up this file. Duringauto provisioning, the IP phone will download the -local.cfg file from theprovisioning server or a specific server to override the one stored on the phone.Note: It works only if the value of the parameter “static.auto_provision.custom.protect” is setto 1 (Enabled). The upload/download path is configured by the parameter“static.auto_provision.custom.sync.path”.Web User Interface:
