Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones360To configure auto redial via phone user interface:1. Press Menu->Features->Others->Auto Redial.2. Press or , or the Switch soft key to select the desired value from the Auto Redialfield.3. Enter the waiting time (in seconds) in the Redial Interval field.4. Enter the desired times in the Redial Times field.5. Press the Save soft key to accept the change.Auto AnswerAuto answer allows IP phones to automatically answer an incoming call. By default, the IPphones will not automatically answer the incoming call during a call or while dialing even if autoanswer is enabled; and the incoming call will not be automatically answered if you end the currentcall or cancel the dialing. You can configure the IP phones to automatically answer the incomingcall after ending all calls or canceling the dialing. Auto answer is configurable on a per-line basis.Auto-Answer delay defines a period of delay time before the IP phone automatically answersincoming calls.Auto Answer ToneAuto answer tone allows the IP phones to play a tone when an incoming call is automaticallyanswered. You can customize the auto answer tone or select specialized tone sets (vary fromcountry to country) for your IP phone. For more information, refer to Tones on page 784.Auto Answer MuteAuto answer mute allows IP phones to mute the local microphone when an incoming call isautomatically answered.ProcedureAuto answer can be configured using the following methods.CentralProvisioning(ConfigurationFile).cfgConfigure auto answer and auto answermute for SIP account X.Parameter:account.X.auto_answer.cfgSpecify a period of delay time for autoanswer.Parameter:features.auto_answer_delay
