Yealink SIP-T26P User Manual

Also see for Yealink SIP-T26P: Information Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T26P User Manual Manual pdf 102 page image

User Guide for the SIP-T26P IP Phone90and search for the contact (Directory should be configured in advance. Refer toDirectory on page 30 for more information.).- Press the Dir soft key, and then select History. Select the desired list and useor to select the entry (Directory should be configured in advance.Refer toDirectory on page 30 for more information.).- Press the Dir soft key, and then select Remote Phone Book. Select the desiredgroup and search for the contact (Directory and remote phone book should beconfigured in advance. Refer to Directory on page 30 and Remote Phone Bookon page 42 for more information.).3. Press or to dial out.4. Press or the Tran soft key to complete the transfer when receiving theringback.To perform an attended transfer:1. Press or the Tran soft key during a call.2. Do one of the following:- Enter the number you want to transfer the call to.- Press the Dir soft key, and then select Local Directory. Select the desired group,and search for the contact (Directory should be configured in advance. Refer toDirectory on page 30 for more information.).- Press the Dir soft key, and then select History. Select the desired list and useor to select the entry (Directory should be configured in advance.Refer toDirectory on page 30 for more information.).- Press the Dir soft key, and then select Remote Phone Book. Select the desiredgroup and search for the contact (Directory and remote phone book should beconfigured in advance. Refer to Directory on page 30 and Remote Phone Bookon page 42 for more information.).3. Press or to dial out.4. After the party answers the call, press or the Tran soft key to complete thetransfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can cancel the transfer before the call is connected by pressing the Cancel soft key.You can enable or disable call waiting on the phone. If call waiting is enabled, you canreceive another call while there is already an active call on the phone. Otherwise,another incoming call is automatically rejected by the phone with a busy messagewhen there is an active call on the phone. You can also enable or disable the phone to