Yealink SIP-T26P User Manual

Also see for Yealink SIP-T26P: Information Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T26P User Manual Manual pdf 125 page image

Advanced Phone Features113You can use multicast paging to quickly and easily forward out time sensitiveannouncements to people within the multicast group. You can configure a multicastpaging key or a paging list key on the phone, which allows you to send a Real TimeTransport Protocol (RTP) stream to the pre-configured multicast address(es) withoutinvolving SIP signaling. You can configure the phone to receive an RTP stream frompre-configured multicast listening address(es) without involving SIP signaling. You canspecify up to 10 multicast listening addresses.To configure a multicast paging key via phone user interface:1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Multicast Paging from the KeyType field.5. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Valuefield.The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.6. Press the Save soft key to accept the change or the Back soft key to cancel.Multicast paging key is configurable via web user interface at the pathDSSKey->Memory Key (or Line Key).To configure a paging list via phone user interface:1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Paging List from the Key Type field.5. Press the Save soft key to accept the change or the Back soft key to cancel.Paging list key is configurable via web user interface at the path DSSKey->Memory Key(or Line Key).