Yealink SIP-T26P User Manual

Also see for Yealink SIP-T26P: Information Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T26P User Manual Manual pdf 36 page image

User Guide for the SIP-T26P IP Phone24You can set the “#” or “*” to perform as a send key while dialing.To configure key as send via phone user interface:1. Press Menu->Features->Key as Send.2. Press or , or the Switch soft key to select # or * from the Key as Send field,or select Disabled to disable this feature.3. Press the Save soft key to accept the change or the Back soft key to cancel.Key as send is configurable via web user interface at the path Features->GeneralInformation.You can lock your phone temporarily when you are not using it. This feature helps you toprotect your phone from unauthorized use.Phone lock consists of the following:Menu Key: The Menu soft key and MESSAGE key are locked. You cannotaccess the menu of the phone until unlocked.Function Keys: The function keys are locked. You cannot use the MESSAGE, OK,HOLD, MUTE, TRAN, RD, CONF, X, navigation keys, line keys,memory keys and the soft keys until unlocked.All Keys: All keys are locked except the Volume key. You are only allowedto dial emergency numbers, reject incoming calls by pressingthe X key, answer incoming calls by lifting the handset, pressingthe Speakerphone key, the HEADSET key or the OK key, place anactive call on hold by pressing the Hold soft key or the HOLD key,resume the held call by pressing the Resume soft key or theHOLD key, and end the call by pressing the X key, hanging upthe handset or pressing the Speakerphone key.Note The emergency number setting, if desired, must be made before lock activation. Formore information, refer to Emergency Number on page 66.