Yealink SIP-T40P User Manual
Also see for SIP-T27P: Developer's guideAdministrator's guideManualUser guideQuick start guide
                                                                                                                                                                                            | |
Contents
| 
User Guide for the SIP-T40P IP Phone104Press , or the Send soft key to complete the transfer. Press the Dir soft key, and then select History. Select the desired list and thenpress or to select the entry (Directory should be configured inadvance. Refer to Directory on page 37 for more information).Press , or the Send soft key to complete the transfer. Press the Dir soft key, and then select Remote Phone Book. Select the desiredgroup and search for the contact (Directory should be configured in advance.Refer to Directory on page 37 and Remote Phone Book on page 49 for moreinformation).Press , or the Send soft key to complete the transfer.Semi-attended TransferBefore performing a semi-attended transfer (except you use dial number method), make surethat the transfer mode on DSS key is configured as New Call or Attended Transfer. For moreinformation on how to configure it, refer to Configuring Transfer Mode on DSS Key on page123.To perform a semi-attended transfer:1. Press the Tran soft key during a call.2. Do one of the following:- Enter the number you want to transfer to.Press or to dial out.- Press the Dir soft key, and then select Local Directory. Select the desired group andsearch for the contact (Directory should be configured in advance. Refer to Directoryon page 37 for more information).Press , or the Send soft key to dial out.- Press the Dir soft key, and then select History. Select the desired list and then pressor to select the entry (Directory should be configured in advance. Refer toDirectory on page 37 for more information).Press , or the Send soft key to dial out.- Press the Dir soft key, and then select Remote Phone Book. Select the desired groupand search for the contact (Directory should be configured in advance. Refer toDirectory on page 37 and Remote Phone Book on page 49 for more information).Press , or the Send soft key to dial out.- If Allow Trans Exist Call (refer to Allow Trans Exist Call on page 101) is enabled, youcan select the NewCall and repeat steps mentioned above to complete transfer.3. Press the Tran soft key to complete the transfer when receiving ringback.If you are using a handset, the transfer can be completed by hanging up the handset. |
Related manuals for Yealink SIP-T27P
manualsdatabase
Your AI-powered manual search engine