User Guide for the SIP-T40P IP Phone1183. Press or , or the Switch soft key to select Enabled from the Local Anonymousfield.4. (Optional.) Press or , or the Switch soft key to select the desired value from theSend Anony Code field.The phone will send the configured on code or off code depending on your selection whenyou enable or disable anonymous call feature on the phone.5. (Optional.) Enter the anonymous call on code in the On Code field.6. (Optional.) Enter the anonymous call off code in the Off Code field.7. Press the Save soft key to accept the change or the Back soft key to cancel.Anonymous call is configurable via web user interface at the path Account->Basic.To place an anonymous call:1. Using the specific line on the phone to place a call to phone B.The LCD screen of phone B prompts an incoming call from anonymity.Anonymous Call RejectionYou can use anonymous call rejection to reject incoming calls from anonymous callers.Anonymous call rejection automatically rejects incoming calls from callers who deliberatelyblock their identities and numbers from being displayed. Anonymous call rejection isconfigurable on a per-line basis. You can also configure the phone to send anonymous callrejection on/off code to the server to activate/deactivate anonymous call rejection on the serverside.To configure anonymous call rejection via phone user interface:1. Press Menu->Features->Anonymous Call.2. Press or , or the Switch soft key to select the desired line from the Line ID field.3. Press or to scroll to the Anony Rejection field.
