Yealink SIP-T46G User Manual

Also see for Yealink SIP-T46G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 112 page image

User Guide SIP-T46G IP Phone1022. Select the desired conference type from the pull-down list of Conference Type.3. Enter the conference URI (e.g., conference@example.com) in the Conference URIfield.4. Click Confirm to accept the change.To set up a network conference call:1. Place a call to the first party.2. Press the Conference soft key to create a new call.The active call is placed on hold.3. Enter the number of the second party and press , , or the Send soft key.4. When the second party answers the call, press the Conference soft key to add thesecond party to the conference.5. Press the Conference soft key to create a new call.The conference is placed on hold.6. Enter the number of the new party and then press , , or the Send soft key.7. When the new party answers the call, press the Conference soft key to add the newparty to the conference.8. Repeat steps 5 to 7 until you have added all intended parties.The procedures to set up a network conference call for specific servers may be differentfrom introduced above. Contact your system administrator for more information.You can use call park feature to place a call on hold, and then retrieve the call fromanother phone in the system (for example, a phone in another office or conferenceroom). You can park an active call by pressing the call park key on the phone. If the callis parked successfully, the response is either a voice prompt confirming that the call wasparked, or a visible indication on the LCD screen.NoteTo configure a call park key via phone user interface:1. Press Menu->Call Feature->DSS Keys.2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Call Park from the Key Event field.5. Press or , or the Switch soft key to select the desired line from the AccountID field.Call Park feature is not available on all servers. Contact your system administrator formore information.