Yealink SIP-T46G User Manual

Also see for Yealink SIP-T46G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 16 page image

User Guide SIP-T46G IP Phone6There are two ways to customize specific configurations on your SIP-T46G IP phone: Using the user interface on the IP phone. Using the user interface in an internet browser window from your PC.The hardware components keypad and LCD screen constitute the phone user interface,which allows the user to execute all call operation tasks and basic configurationchanges directly on the phone. In addition, you can use the web user interface toaccess all configuration settings. In many instances, it is possible to use both the phoneuser interface and the web user interface to operate the phone and change settings.However, in some instances, it is only possible to use the phone or the web userinterface.You can customize your phone by pressing the Menu soft key to access the phone userinterface. The Advanced options are only accessible to an administrator, and thedefault administrator password is admin (case-sensitive). For more information oncustomizing your phone using the available options from the phone user interface, referto Customizing Your Phone on page 21.In addition to the phone user interface, you can also customize your phone via web userinterface. In order to access the web user interface, you need to know the IP address ofyour new phone. To obtain the IP address, press the OK key on the phone. Enter the IPaddress (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web browser onyour PC. The default administrator user name and password are both admin(case-sensitive).The options you can use to customize the IP phone via phone user interface and/or viaweb user interface are listed in the following table:Options Phone User Interface Web User InterfaceStatus√ √--IPv4--MAC--Firmware--Network--Phone--Accounts