Yealink SIP-T46G User Manual
Also see for Yealink SIP-T46G: Developer's guideAdministrator's guideManualAuto provisioning guideGetting started
                                                                                                                                                          | |
Contents
| 
User Guide SIP-T46G IP Phone34To select a ring tone for the account via web user interface:1. Click on Account.2. Select the desired account from the pull-down list of Account.3. Click on Basic.4. Select the desired ring tone from the pull-down list of Ring Type.If Common is selected, this account will use the ring tone selected for the phone atSettings->Preference. Refer to the above instruction.5. Click Confirm to accept the change.You can also upload custom ring tones for your phone, contact your systemadministrator for more information.NoteThis section provides the operating instructions for managing contacts. The topicsinclude: Directory Local Directory Blacklist Remote PhonebookThe ring tone for an incoming call on the phone may be different. For example, when thephone receives an incoming call from a contact stored in the local directory, it will playthe ring tone assigned to the contact in the contact directory (refer to Adding Contacts inthe Contact Management section). Otherwise, the phone will play the ring tone assignedto the account. If both the contact ring tone and the account ring tone are not assigned,then the phone will play the ring tone assigned for the phone. |
Related manuals for Yealink Yealink SIP-T46G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine