Yealink SIP-T46G User Manual

Also see for Yealink SIP-T46G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 16 page image

User Guide for the SIP-T46G IP Phone6Two ways to customize configurations of your SIP-T46G IP phone: The user interface on the IP phone. The user interface in a web browser on your PC.The hardware components keypad and LCD screen constitute the phone user interface,which allows the user to execute all call operation tasks and basic configurationchanges directly on the phone. In addition, you can use the web user interface toaccess all configuration settings. In many cases, it is possible to use either the phoneuser interface and/or the web user interface interchangeably. However, in some cases,it is only possible to use one or the other interface to operate the phone and changesettings.You can customize your phone by pressing the Menu soft key to access the phone userinterface. The Advanced option is only accessible to the administrator, and the defaultadministrator password is “admin” (case-sensitive). For more information oncustomizing your phone with the available options from the phone user interface, referto Customizing Your Phone on page 19.In addition to the phone user interface, you can also customize your phone via web userinterface. In order to access the web user interface, you need to know the IP address ofyour new phone. To obtain the IP address, press the OK key on the phone. Enter the IPaddress (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web browser onyour PC. The default administrator user name and password are both “admin”(case-sensitive).The options you can use to customize the IP phone via phone user interface and/or viaweb user interface are listed in the following table:Options Phone User Interface Web User InterfaceStatus√ √--IPv4--MAC--Firmware--Network--Phone--Accounts