Yealink T5 Series IP Phones User Guide96Visual Alert for Monitored LinesYour system administrator can enable Visual Alert for BLF Pickup feature, which allows your phone to display the callerID when the monitored line receives an incoming call.TopicsHandling a Remote Call when Visual AlertHandling a Remote Call when Visual AlertWhen the monitored line receives an incoming call, your phone LCD screen displays an incoming call to the monitoredline (for example, from 1008 to 1001). You can pick up the call to monitored line, place a call to monitored line, place anew call or go back to the Idle screen.Before You BeginIf you want to pick up a remote call, check with your system administrator to make sure that the directed call pickupcode is set in advance.ProcedureDo one of the following:l Press Pick Up to pick up the incoming call.The remote phone stops ringing and the call is answered on your phone. The caller ID of the party that initiated thecall appears on the screen.l Press Send to place a call to the monitored line.l Press New Call to place a new call.l Press Cancel to go back to the Idle screen.NoteIf your phone is locked, you cannot use the Pick Up, Send, New Call and Cancel soft keys until unlocked. For more inform-ation, refer to Phone Lock.Picking up a Remote Call by BLF KeyWhen a monitored line receives an incoming call, you can pick up the incoming call by pressing the BLF key. Forexample, if the monitor user is not at his/her desk and someone rings his/her line, you can pick up the call simply bypressing the flashing BLF key.Before picking up an incoming call, make sure that the directed call pickup code has been configured in advance.Topics
