Yealink T5 Series IP Phones User Guide100Transferring a Call by BLF List KeyWhen there is already an active call on the IP phone, you can transfer the active call to the monitored user by pressingthe BLF List key.The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode viaDsskey feature configured by your system administrator.TopicsPerforming a Blind TransferPerforming a Semi-attended/Attended TransferPerforming a Blind TransferBefore You BeginCheck with your system administrator to make sure that the Transfer Mode via Dsskey is set to Blind Transfer.Procedure1. During a call, press the BLF List key of the monitored line which you want to transfer this call to.Performing a Semi-attended/Attended TransferBefore You BeginCheck with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer.Procedure1. During a call, press the BLF List key of the monitored line which you want to transfer this call to. The phone will dialout the number of the monitored line.2. Press the BLF List key of the monitored user again or Transfer to complete the transfer when the monitored userreceives ringback or after the monitored user answers the call.Retrieving a Call by BLF List KeyYou can use the BLF List key to retrieve a call which is parked to the monitored line directly.Check with your system administrator to find out if this feature is available on your phone.Procedure1. Press the desired BLF List key to retrieve a call that is parked to the monitored line.Barging In an Active Call by BLF List KeyYou can use the BLF List key to barge in a conversation and set up a conference call.Check with your system administrator to find out if this feature is available on your phone.Procedure1. Press the BLF List key.The IP phone dials out the barge-in code followed by the monitored line, and then you can join the call. Each ofthe three parties can hear the other two parties.
