Call Features73Setting a Transfer KeyYou can set a line key as a Transfer key, and specify a contact you want to transfer a call to for this key.Procedure1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.2. Select Key Event from the Type field.3. Select Transfer (Trans) from the Key Type field.4. Do one of the following:l (Optional.) Enter the string that will display on the LCD screen in the Label field.Enter the contact number you want to transfer the call to in the Value field.l Highlight the Label or Value field. Press Directory and then select a desired contact from the Directory list(s).5. (Optional.) For the SIP-T52S IP phone, enter the string that will appear on the Dialing/Pre-dialing/Calls screen in theShort Label field.6. Press Save.TipBy default, you can long press a desired line key to set it. But your system administrator can configure the phone to enterthe Add Contact screen by long pressing the line key.Performing a Blind Transfer Using a Transfer KeyBefore You BeginYou need to set a Transfer key with a specific contact. By default, your system administrator has set your phone to per-form blind transfer by Transfer key.Procedure1. Press the Transfer key during a call.The call is transferred to the specific contact directly.Related TopicsSetting a Transfer KeyPerforming a Semi-Attended/Attended Using a Transfer KeyBefore You BeginYou need to set a Transfer key with a specific contact. Your system administrator has set your phone to perform atten-ded transfer by Transfer key.Procedure1. Press the Transfer key during a call.The phone calls the specific contact first. Wait until you hear the ringback tone or until the contact answers thecall.2. Press the Transfer key again.Related TopicsSetting a Transfer Key
