Overview25LED Status DescriptionThe phone receives an audio-only call.Flashing green The phone receives a video call.Solid redThere is an active video call.The video call is muted.The video call is held.Slowly flashing redThe shutter switch is open, but the near-site video isstopped transmitting during a video call.The video call is placed on hold.OffThe phone is powered off.The camera is not properly connected to the phone.The shutter switch is closed.User InterfacesTwo ways to customize configurations of your SIP VP-T49G IP phone: The user interface on the IP phone. The user interface in a web browser on your PC.The hardware components keypad and touch screen constitute the phone user interface, whichallows the user to execute all call operation tasks and basic configuration changes directly onthe phone. In addition, you can use the web user interface to access all configuration settings. Inmany cases, it is possible to use either the phone user interface and/or the web user interfaceinterchangeably. However, in some cases, it is only possible to use one or the other interface tooperate the phone and change settings.Phone User InterfaceYou can customize your phone by tapping to access the phone user interface. TheAdvanced option is only accessible to the administrator, and the default administratorpassword is “admin” (case-sensitive). For more information on customizing your phone with theavailable options from the phone user interface, refer to Customizing Your Phone on page 63.NoteWeb User InterfaceIn addition to the phone user interface, you can also customize your phone via web userinterface. In order to access the web user interface, you need to know the IP address of yournew phone. To obtain the IP address, tap ->Status on the phone when the phone is idle.For a better understanding of the menu structure, please refer to Appendix B – Menu Structureon page 313.