Yealink SIP VP-T49G User Manual

Also see for SIP VP-T49G: Developer's guide Getting started Recovery guide Quick start guide User guide

Contents

Yealink SIP VP-T49G User Manual Manual pdf 79 page image

Customizing Your Phone795. Tap the Save soft key to accept the change or to cancel.Administrator password is configurable via web user interface at the path Security->Password.Key as SendYou can set the "#" key or "*" key to perform as a send key while dialing.To configure key as send via phone user interface:1. Tap ->Features->General.2. Tap the Key as Send field.3. Tap # or * in the pop-up dialog box, or tap Disabled to disable this feature.4. Tap the Save soft key to accept the change or to cancel.Key as send is configurable via web user interface at the path Features->General Information.Phone LockYou can lock your phone temporarily when you are not using it. This feature helps to protectyour phone from unauthorized use.When the phone is locked, the following you needed to know:All keys and screen are locked except the HEADSET key, Volume key, digit keys, # key, * key andSpeakerphone key. You are only allowed to dial emergency numbers, reject incoming calls bytapping the Reject soft key, answer incoming calls by lifting the handset, pressing theSpeakerphone key, the HEADSET key or tapping the Answer soft key, and end the call byhanging up the handset, pressing the Speakerphone key or tapping the EndCall soft key.Note The emergency number setting, if desired, must be made before lock activation. For moreinformation, refer to Emergency Number on page 155.