Yealink SIP VP-T49G User Manual

Also see for SIP VP-T49G: Developer's guide Getting started Recovery guide Quick start guide User guide

Contents

Yealink SIP VP-T49G User Manual Manual pdf 36 page image

User Guide for SIP VP-T49G IP Phone36and stick it down; connect one end of the USB3.0 cable to the camera.- Remove the other piece of the fastener’s liner and attach to the external monitor;attach the camera to the external monitor by pressing two sides of Dual Lock together.Make sure the camera is vertical and not askew otherwise the near-site video imagewill be crooked. You are advised to attach the camera to the external monitor whoseback is straight.- Connect the other end of USB3.0 cable to the IP phone.- Connect one end of the HDMI cable to the HDMI port on the phone, and connect theother end to the HDMI port on the external monitor.After you connect an external monitor to your phone, the icon will display on thestatus bar of the touch screen, and the touch screen will prompt “Ext. Display connected”.NoteNetwork ConnectionYou have two options for network connection. You can select one of them according to thecurrent office environment. Connecting to the wired network Connecting to the wireless networkConnecting to the Wired NetworkYou can connect your phone to a wired network.You can adjust the camera angle by rotating it up and down, and you have to press on the backof camera to rotate it when you insert the camera to the IP phone.If you want to insert the camera back to the IP phone and do not torn the 3M Dual Lock, pleaseinsert forcibly until the camera indicator LED illuminates solid green. And the embossing on thecamera does not need to insert into the groove on the IP phone.The Extended Display Accessories ED10 which is not included with your IP phone is required forconnecting the external monitor. Contact your reseller to purchase it separately. For moreinformation, refer toYealink Extended Display Accessories Quick Installation Guide for SIPVP-T49G.