Yealink Teams T58A User Manual

Also see for T58A Teams: Configuring guide Administrator's guide User guide Administrator's guide Manual

| Wireless Network | 39Before you beginMake sure the Wi-Fi USB Dongle WF50 is connected to the T56A phone.Procedure1. Navigate to > Settings > Device Settings > Wi-Fi.2. Turn on Wi-Fi.Connecting to the Wireless NetworkThere are three ways to connect the phone to the wireless network:• Connecting to an Available Wireless Network Manually• Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)• Adding a Wireless Network manuallyConnecting to an Available Wireless Network ManuallyBefore you beginGet the password of the wireless network from your system administrator. Make sure that the Wi-Fi modeis activated.Procedure1. Navigate to > Settings > Device Settings > Wi-Fi.2. Tap > Scan to search the available wireless network.3. Select the desired wireless network.4. If the network is secure, enter its password.5. Tap CONNECT.Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks,which can automatically configure a wireless network with a network name (SSID) and strong WPA dataencryption and authentication.About this taskTwo methods supported by Yealink IP phones in the Wi-Fi protected setup:• Push Button Configuration (PBC): The user simply presses the WPS key on both the IP phone andgateway/router to connect.• Personal Identification Number (PIN): The user has to enter a PIN generated randomly by the IPphone on the gateway/router to connect.• Connecting to the Wireless Network Using PBC• Connecting to the Wireless Network Using PINConnecting to the Wireless Network Using PBCBefore you beginMake sure Wi-Fi Mode is activated.