Yealink VC110 User Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Overview21 The IP address of the endpoint is shown on the top right corner of the displaydevice. Press (Menu soft key) on your remote control and select Status ->Network.The display device shows network information about the endpoint. Press on the VCP40 phone when the phone is idle and select Network.The LCD screen of the phone displays the network information of the endpoint.Log into the web user interface:1. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar ofa web browser on your PC, and then press the Enter key.2. Enter the administrator user name and password.The default user name is “admin” (case-sensitive), and the default password is“0000”.3. Click Login.After you log into the web user interface successfully, you can click Logout on the topright corner of the web interface to log out.The following table shows documentations available for the VC110 video conferencingendpoint.Name Contents Where found LanguageYealink VC110All-in-one HD VideoConferencingEndpoint QuickStart GuideEndpoint installationand networkconfigurationOn the website/In the packageEnglish/Chinese