Yealink VC110 User Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Using the VC110 Video Conferencing Endpoint81To enable the DND mode via the remote control:1. Press (Menu soft key) to enter main menu.2. Press or to select the Call Features menu.3. Press or to scroll to DND, and then press to enable this feature.4. Press (Save soft key) to accept the change.The icon will appear on the status bar of display device, and “DND ON!” willbe prompted at intervals. The icon will appear on the LCD screen of theVCP40 phone.The endpoint will reject all incoming calls automatically, and the icon and numbers ofmissed calls are displayed on the status bar of the display device. If the endpointplaces a call, after the call is established, the DND mode will be disabled automatically.When VCP40 phone is idle, you can also press the DND soft key to enable or disable thisfeature.DND is configurable via the web user interface at the path Setting->CallFeatures->DND.DND during an active callYou can use the DND mode to reject incoming calls automatically during an active call.You can enable/disable the DND mode for the endpoint via the remote control, VCP40phone or web user interface. The DND mode will be disabled after the call ends.To enable the DND mode during a video call via the remote control:1. Press (More soft key) during a video call.2. Press or to scroll to DND, and then press to enable this feature.The icon will appear on the status bar of display device, the icon will