Yealink VC110 User Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Getting Started23This chapter provides the following basic installation instructions and information forachieving the best performance from your VC110 video conferencing endpoint. Topicsinclude: Endpoint Connection and Installation Powering the Endpoint On or Off Setup Wizard Registration Idle Screen Display Navigating Menus on the Display Device Entering Data and Editing Fields Endpoint StatusIf you require additional information, or assistance to help you use your new phone,contact your system administrator.This section introduces the following: Connecting the VC110 video conferencing endpoint Installing the VC110 video conferencing endpoint Installing batteries in the remote control Connecting the CPE80 expansion microphoneNote Up to two display devices can be connected to the VC110 all-in-one unit. Because thedisplay device is not included in the package, you need to purchase it separately ifrequired. Ensure that the purchased display device supports HDMI input.When connecting only one display device to the VC110 all-in-one unit, Display1 port isthe only available port. If dual screen mode is required, you can connect another displaydevice to the Display2 port.Because DVI cable is tailor-made, please use the Yealink-supplied DVI cable.To prevent shock, do not connect the power adapter and turn on the power beforeconnecting all endpoint components.