User Guide for the VC400 Video Conferencing System14Indicator LED on the camera:LED Status DescriptionSolid green The camera is properly connected to the codec, andthe VC400 codec is powered on.Solid red The VC400 codec is in sleep mode.Flashing green Press the key on the remote control.Off The camera is not connected properly to the VC400codec, or the VC400 codec is powered off.Indicator LED on the VCP40:LED Status DescriptionSolid red The phone is initializing.The call is muted.Flashing red The phone is ringing.Solid green The phone is placing a call.There is an active call on the phone.Off The phone is idle.There are two ways to customize the configurations of your VC400 video conferencingsystem: Remote control The user interface in a web browser on your PC.NoteYou can use the remote control and display device to configure and use the VC400video conferencing system.For more information about the function of each key on the remote control, refer toVCR10 Remote Control on page 9.The Advanced option is only accessible to the administrator. The default administratorpassword is “0000”. For more information about how to view, enter and edit the menusettings on the display device, refer to Navigating Menus on the Display Device onpage 27 and Entering Data and Editing Fields on page 28.The display device and remote control constitute the system user interface. This allowsthe user to execute all call operation tasks and basic configuration changes directly.Detailed operational steps will be explained in the feature section.