Getting Started13Getting StartedThis chapter provides basic information and installation instructions for Yealink VC800 systemsin the following sections: Connecting the VC800 Video Conferencing System Installing the VC800 Video Conferencing System Installing Batteries for the Remote Control Powering the System On Put the System to Sleep Powering the System Off System Initialization System Startup Setup Wizard Enabling Communication with Other Systems Placing a Test Call to Yealink VC800 SystemConnecting the VC800 Video Conferencing SystemThis section introduces the following: Connecting the VC800 codec Connecting the Audio DeviceNoteConnecting the VC800 Codec1. Connect the LAN port on the VC800 codec to a switch/hub device port with the supplied3m Ethernet cable.Up to two display devices can be connected to the VC800 codec. Because the display device isnot included in the package, you need to purchase it separately if required. Ensure that thepurchased display device supports HDMI input.When connecting only one display device to the VC800 codec, display1 port is the only availableport. If dual screen mode is required, you can connect secondary display device to the Display2port.To prevent shock, do not connect the power adapter and turn on the power before connectingall system components.
