Administrator’s Guide for Yealink VC800 Video Conferencing System20 Secondary DNSYou need to configure the network settings of the system manually if any of them are notprovided by the DHCP server. For more information on configuring network settings manually,refer to Configuring Network Settings Manually on page 29.System StartupAfter the initializing process, the system will complete startup by cycling the following steps:1. The LED indicator on the VC800 codec illuminates solid green.2. The display device displays the boot up screen.3. The camera pans to the middle position automatically.4. The display device displays the setup wizard (when you first start up, or reset the system,the display device will display the setup wizard)For more information on how to complete the setup wizard, refer to Setup Wizard on page20.5. After completing the setup wizard, the display device displays the main screen.The main screen displays the following: Time and date System IP address and site name Status icon Soft key labels Video image6. The CP960 conference phone starts up normally. The phone’s touch screen displays thestatus icon, soft keys, time and date.If the system has successfully passed through these steps, it starts up correctly and is ready foruse.Setup WizardWhen you first start up or reset the system, the display device will display the setup wizard.Menu DescriptionLanguageSet the language displayed on the display device.The default language is English. For more information, refer to Languageon page 161.Date&TimeThe system obtains the time and date from the NTP server automaticallyby default. You can also configure the time and date manually. For moreinformation, refer to Date & Time on page 162.Site Name Edit the site name.For more information, refer to on Site Name on page 158.
