Yealink VC880 User Manual

Also see for MeetingSpace VC200: Administrator's guide Administrator's guide Administrator's guide Administrator's guide Quick start guide

| Getting Started | 19Powering off the SystemProcedure1. On your remote control, press .2. Select Shut down and then press OK key.The system shuts down immediately, and the LED indicator goes out.Running the Setup WizardThe setup wizard appears automatically at the first startup or when the system is reset to factory. You can configurethe initiative settings, for example the language, the network, and the account, for the device by your remote control/CTP20 touch panel.Note: You can also tap Exit Boot Wizard on your CP960 to skip the setup wizard.Putting the System to SleepYou can put the system to sleep immediately if you do not use it temporarily.Procedure1. On your remote control, press .2. Select Sleep and then press OK key.The system goes to sleep immediately, and the LED on the system or the camera glows solid red.Waking up the SystemProcedureDo one of the following:• On your remote control, press any button.• On your CP960, tap the touch screen or any key.• Touch the CTP20 screen.Screens and IconsBefore you use the system, you need familiarize yourself with the screen layouts and icons.• Idle Screen• Control Center/Notification Center• Icon IntroductionIdle Screen• Idle Screen of the Monitor