Yealink VC880 User Manual

Also see for MeetingSpace VC200: Administrator's guide Administrator's guide Administrator's guide Administrator's guide Quick start guide

| Settings | 94• Adjusting the Local Camera to a Stored Preset by CTP20Adjusting the Local Camera to a Stored Preset by Remote ControlProcedure1. On your remote control, do one of the following:• When the system is idle, select a local video image and press OK key, and then press .• When the system is idle, for VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.• When the system is during a call, press and select Preset Location.2. Select a stored preset, and then press OK key to change the camera position to the stored preset.You can also press any numeric key on the remote control to change the camera position to the stored preset. Butin this way, you can only move the local camera to a position whose serial number ranges within 0 to 9.Adjusting the Local Camera to a Stored Preset by CTP20Procedure1. In idle state, tap Camera.2. In the right side, select a stored preset, and change the camera position to the stored preset.Updating the Stored PresetYou can update the stored presets, which helps you decide where you want your camera to move.• Updating the Stored Preset by Remote Control• Updating the Stored Preset by CTP20Updating the Stored Preset by Remote ControlProcedure1. Do one of the following on your remote control when your system is idle:• Select the local video image and press OK key, and then press .• For VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.2. Select Update Preset and then press OK key.All the stored preset will be updated.Updating the Stored Preset by CTP20Procedure1. In idle state, tap Camera to go to the Preset page.2. On the top of the saved presets, tap .Editing the Stored Preset• Editing the Stored Preset by Remote control• Editing the Stored Preset by CTP20