User Guide for the W52 Cordless PhoneBASIC OPERATIONS18To register a handset manually via the handset:1. Long press on the base station.The registration LED slow flashes, indicating the base station is in the registration mode.2. Press on the handset to enter the main menu.3. Select ->Registration->Register Handset.The LCD screen displays the Base1-Base4.4. Press or to highlight the desired one, and then press the OK soft key.The handset begins to search for the base station.5. Press the OK soft key when the LCD screen displays the RFPI code of the base station.6. Enter the system PIN (default: 9871).7. Press the Done soft key.The handset plays a warning tone and prompts “Handset Subscribed”, which indicates the handsetis registered successfully.After successful registration, an internal handset number and handset name appear on the LCD screen.To de-register a handset via the handset:1. Press to enter the main menu.2. Select ->Registration->De-reg. Handset.3. Enter the system PIN (default: 9871).4. Press the Done soft key.The LCD screen displays the names of the handsets registered to the same base station.The name of the handset itself is highlighted and followed by a left arrow.5. Press or to highlight the desired handset name, and then press the OK soft key.The LCD screen prompts “De-register Handset”.6. Press the Yes soft key to de-register the handset or the No soft key to cancel.Select Base StationThe handset can be registered to the base station automatically only if the handset is registered to more than onebase station. You can select Bestbase to search for the base station with the best signal strength.To select the base station via the handset:1. Press to enter the main menu.2. Select ->Registration->De-reg. Handset.The LCD screen displays all base stations the handset registered to and the Bestbase option.The radio box of the currently used base station is marked.3. Press or to highlight the desired base station or the Bestbase option, and then press theSelect soft key.The handset begins to search for base station. After successful connection, the handset plays a warning toneand prompts “Base selected successfully!”.You can highlight the base station the handset registered to, and then press the Rename soft key to rename thebase station name.