User Guide for the W52 Cordless PhonePHONE SETTINGS272. Select ->Display->Color Schemes.3. Press or to highlight the desired color scheme and preview its effect.4. Press the Select soft key to mark the radio box of the highlighted color theme.The color theme of the handset is changed accordingly.Keypad LightYou can enable the keypad light to make the keypad light up when any key is pressed. This helps you distinguishkeys from each other in a dark environment.To configure keypad light via the handset:1. Press to enter the main menu.2. Select ->Display->Keypad Light.3. Press the Change soft key to check or uncheck the Keypad Light checkbox.Notification LightNotification light is used to indicate voice mails and missed calls. When the handset receives a voice mail ormisses a call, the message key LED flashes red. You can configure the notification light to indicate the voicemails or missed calls respectively.To configure notification light via the handset:1. Press to enter the main menu.2. Select ->Display->Notification Light.3. Press or to select the desired value from the Voice Mail field.If Enabled is selected, the message key LED flashes red when the handset receives a voice mail.If Disabled is selected, the message key LED won’t flash when the handset receives a voice mail.4. Press or to select the desired value from the Missed Call field.If Enabled is selected, the message key LED flashes red when the handset misses a call.If Disabled is selected, the message key LED won’t flash when the handset misses a call.5. Press the Save soft key to accept the change or the Back soft key to cancel.When you press the Message key to view the missed calls or the received messages, the messagekey LED will go out.NOTE: