Call Features73Anonymous CallYou can use anonymous call feature to block the identity and phone number from showing upto the called party when you call someone. For example, you want to call to consult someservice, but do not want to be harassed. You can configure anonymous call feature on a per-linebasis.NoteTo configure anonymous call feature for a specific line via the handset:1. Press to enter the main menu.2. Select Call Features->Anonymous Call.The LCD screen displays the outgoing lines currently assigned to the handset. The defaultoutgoing line is highlighted and followed by a left arrow.3. Press or to highlight the desired line, and then press the OK soft key.4. Press or to select the desired value from the Status field.5. Press the OK soft key to accept the change.To place an anonymous call:1. Using the specific line on the handset to place a call.The LCD screen of the destination phone prompts an incoming call from anonymous.Anonymous Call CodeYou can configure the phone to send anonymous call on code/off code to activate/deactivatethe server-side anonymous call feature via web user interface. Contact your systemadministrator for the anonymous call on code and off code.To configure anonymous call code via web user interface:1. Click on Account->Basic.2. Select the desired account from the Account field.3. Select the desired value from the pull-down list of Send Anonymous Code.The phone will send the configured on code or off code depending on your selection whenyou enable or disable anonymous call feature on the phone.The anonymous call feature takes effect on the outgoing lines that assigned to the handset. Formore information on assigning incoming lines, refer to Outgoing Lines on page 50.The anonymous call feature is not available on all servers. Contact your system administrator formore information.