| Call Features | 23ProcedureDo one of the following:• Press the Reg soft key on the handset to register quickly.• Press OK > Register Handset and then select the desired base to register the handset.• Navigate to OK > Settings > Registration > Register Handset and then select the desired base toregister the handset.After registration, the handset prompts “Handset Subscribed”.Note: The default base PIN is 0000.Selecting a DM/Base Station to ConnectYou can connect the handset to a desired DM/base station manually, or allow the handset to connect theregistered DM/base with the greatest signal strength automatically.About this taskIt is only applicable to W56H/W53H.Procedure1. Navigate to OK > Settings > Registration > Select Base.The phone screen displays all DMs/base stations that the handset is registered to and the Bestbaseoption.2. Select the desired DM/base station or Bestbase, and then press Select.Call FeaturesYou can use the phone to place and answer calls, ignore incoming calls, transfer a call to someone else,conduct a conference call and perform other basic call features.• Placing Calls• Answering Calls• Disabling Call Waiting• Silencing or Rejecting Incoming Calls• Ending Calls• Muting/Unmuting Audio• Holding and Resuming Calls• Call Forward• Transferring Calls• Conference Calls• Recording Using an SD CardPlacing CallsAfter the handset is registered successfully, you can use your handset to place an external call.The handset can keep 2 calls at one time at almost, one (associated with the audio) active and the otherone on hold.
