Yealink W56H User Manual

Also see for W80B: Getting started Recovery guide Configuring guide User guide User guide

Contents

Yealink W56H User Manual Manual pdf 34 page image

| Call Features | 34ProcedurePress or End (End Call).If any party in the conference ends the call, the other parties remain connected.Hybrid UC MeetingYou can create a hybrid UC meeting on the CP930W by different ways.• Creating a Hybrid UC Meeting with Mobile Phone• Creating a Hybrid UC Meeting with PC• Creating a Hybrid UC Meeting with Mobile Phone and PCCreating a Hybrid UC Meeting with Mobile PhoneWhen you are talking on your mobile phone and want to invite colleagues, you can create a hybrid UCmeeting on the phone.Procedure1. During the mobile call, active the Bluetooth feature on your mobile phone.2. Connect and pair the phone on your mobile phone.3. Switch the audio input mode to Bluetooth on your mobile phone.4. Select Conf, then enter the desired number to dial out or press Directory to select a contact.5. After the second party answers the call, select Conf.6. Repeat steps 4-5 to invite more parties (up to 4 parties).Creating a Hybrid UC Meeting with PCWhen you are talking with your contact on the PC and want to invite colleagues, you can create a hybridUC meeting on the phone.Procedure1. Connect the phone to a PC using a micro USB cable.2. Select Hold > New Call.3. Enter the desired number to dial out or press Directory to select a contact.4. After the second party answers the call, select Conf.5. Repeat steps 2-4 to invite more parties (up to 4 parties).Creating a Hybrid UC Meeting with Mobile Phone and PCYou can create a hybrid UC meeting on the phone with mobile phone and PC simultaneously.Procedure1. Connect and pair the phone on your mobile phone.2. Connect the PC to your phone by using the micro USB cable.3. Place a call using the softphone on the PC.4. Do the following to place a mobile call over Bluetooth on the phone.a) Select Hold > New Call.b) Select Switch to choose the Mobile Account.c) Enter the desired number.d) Select Send or .