Yealink W56P User Manual
Also see for W56P Telesystem: Provisioning guideUser guideAuto provisioning guideGetting startedRecovery guide
                                                                                                                      | |
Contents
| 
User Guide for the W56P IP DECT Phone54To configure the delay time for dial-now rule via web user interface:1. Click on Features->General Information.2. Enter the time between 0 and 14 (seconds) in the Time-Out for Dial-Now Rule field.The default value is “1”.3. Click Confirm to accept the change.NoteArea codes are also known as Numbering Plan Areas (NPAs). They usually indicategeographical areas in a country. This feature is necessary only when dialing the numberoutside the code area. For example, area code is configured as “Code: 011, MinimumLength: 4, Maximum Length: 11”, then when you dial out the number “56789”, which hasdigits between 4 and 11, the phone will add the area code before the number and dialout (01156789).To configure area code via web user interface via the handset:1. Click on Settings->Dial Plan->Area Code.2. Enter the desired value in the Code, Minimum Length (1-15) and Maximum Length(1-15) field respectively.Dial-now rule and delay time for dial-now rule is configurable via web user interfaceonly.Dial-now rule is applicable for all the handset registered to the base station. |
Related manuals for Yealink W56P Telesystem
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine