User Guide for the W56P IP DECT Phone74You can enable call forward feature on a per-line basis. The handset will forwardincoming calls of the line to another party.Three forwarding types: Always Forward: Incoming calls are immediately forwarded. Busy Forward: Incoming calls are immediately forwarded if the line is busy. No Answer Forward: Incoming calls are forwarded if not answered after a period oftime.NoteTo enable call forward feature for a specific line via the handset:1. Press to enter the main menu.2. Select Call Features->Call Forward.The LCD screen displays the incoming lines currently assigned to the handset. Thedefault incoming line is highlighted and followed by a left arrow.3. Press or to highlight the desired line, and then press the OK soft key.4. Press or to highlight the desired forwarding type, and then press the OK softkey.5. Press or to select Enabled from the Status field.6. Enter the destination number you want to forward incoming calls to in the Targetfield.7. Press or to select the desired ring time to wait before forwarding from theAfter Ring Time field (only available for No Answer Forward).8. Press the Save soft key to accept the change.The icon on the status bar indicates call forward feature is enabled.If Always Forward is selected, there is no prompts display on the LCD screen when theline receives an incoming call. The incoming call is logged in the Received Calls list.NoteYou can transfer an external incoming call to another party in one of the following ways: Blind Transfer: Transfer a call directly to another party without consulting.Call forward feature may be overridden by the server settings. For more information,contact your system administrator.The call forward feature takes effect on the incoming lines that assigned to the handset.For more information on assigning incoming lines, refer to Incoming Lines on page 58.