Zanussi CF 50 SI Instruction Booklet

Contents

3General Safetyn This appliance contains hydrocarbons in itscooling unit; maintenance and rechargingmust therefore only be carried out byauthorised technicians.n Take utmost care when handling yourappliance so as not to cause any damages tothe cooling unit with consequent possible fluidleakages.n The appliance must not be located close toradiators or boilers.n Avoid prolonged exposure of the appliance todirect sunlight.n Do not use other electrical appliances (such asice cream makers) inside of refrigeratingappliances.During Usen This appliance is designed for domestic use only,specifically for the storage of edible foodstuffs. It isnot intended for commercial or industrial use.n Attention! The worktop of this appliance is heatresistant at max 70°C.n Containers with flammable gases or liquids canleak at low temperatures. Do not store anycontainers with flammable materials, such asspray cans, fire extinguisher refill cartridges etc. inthe freezer.n Frozen food should not be refrozen once it hasthawed out.n Do not place carbonated or fizzy drinks in thefreezer compartment.n Ice lollies can cause ‘frost/freezer burns’ ifconsumed straight from the freezer.n Do not remove items from the freezercompartment if your hands are damp/wet, as thiscould cause skin abrasions or frost/freezer burns.n Bottles and cans must not be placed in the freezeras they can burst when the contents freeze.n Manufacturers’ recommended storage timesshould be adhered to. Refer to relevantinstructions.Maintenance and Cleaningn Before cleaning, always switch off the applianceand disconnect from the electrical supply.IMPORTANT SAFETY INSTRUCTIONSPrior to Installationn Check the appliance for transport damage. Underno circumstance should a damaged appliance beinstalled. In the event of damage please contactyour retailer.Installationn This appliance is heavy. Care should be takenwhen moving it.n It is dangerous to alter the specifications orattempt to modify this product in any way.n Ensure that the appliance does not stand on theelectrical supply cable.Important: if the supply cable is damaged, it mustbe replaced by a cable available from themanufacturer or your local Service Force Centre.n Any electrical work required to install thisappliance should be carried out by a qualifiedelectrician or competent person.n Parts which heat up should not be exposed.Whenever possible, the back of the applianceshould be close to a wall, but leaving the requireddistance for ventilation, as stated in the installationinstructions.n The appliance should be left for 2 hours afterinstallation before it is turned on, in order to allowthe refrigerant to settle.Refrigerantn The refrigerant isobutane (R600a) is containedwithin the refrigerant circuit of the appliance, anatural gas with a high level of environmentalcompatibility, which is nevertheless flammable.n During transportation and installation of theappliance, be certain that none of the componentsof the refrigerant circuit become damaged.n If the refrigerant circuit should become damaged:- avoid open flames and sources of ignition.- thoroughly ventilate the room in which the appli-ance is situated.Child Safetyn Do not allow children to tamper with the controls orplay with the product.n There is a risk of suffocation! Keep packagingmaterial away from children!These warnings are provided in the interests of your safety. Ensure that you understand them all beforeinstalling or using this appliance. Your safety is of paramount importance. If you are unsure about anyof the meanings of these warnings contact the Customer Care Department.