Zanussi ZCE 600 W Instruction Booklet

Also see for ZCE 600 W: Instruction booklet Instruction booklet

21Something Not WorkingSYMPTOMn The hob hotplate does not heat up.n The plate is not giving satisfactory resultsn The oven does not come onn The oven temperature light does not come onn The oven light does not come onn It takes too long to finish the dishes, or they arecooked too fast.n Steam and condensation settle on the food and theoven cavity.n The timer does not workn The oven fan is noisySOLUTIONu Check that the unit is plugged in and the electricalsupply is switched onu Check that the RCCB has not tripped (if fitted)u Check the mains fuse has not blownu Check the correct control knob has been turned.u Check the plate is clean and dryu Check the cooking pan is the correct size for theplate.u Check the cooking pan has a flat bottomu Check the setting is correct for the type ofcooking.u Check the oven is in manual operation and thatboth a cooking function and temperature have beenselected.u The socket switch or the switch from the mainssupply to the cooker are ON.u Select a temperature with the thermostat controlknobu Select a function with the oven function controlknob.u Select a function with the oven function controlknobu Check the light bulb, and replace it if necessary(see "Replacing the Oven Light")u The temperature may need adjustingu Refer to the contents of this booklet, especially tothe chapter “Using the Oven”.u Leave dishes inside the oven no longer than 15-20minutes after the cooking is completed.u Check the instructions for the timer.u Check that shelves and bakeware are not vibratingin contact with the oven back panel.If the appliance is not working correctly, please carry out the following checks, before contacting your localZanussi Service Force Centre.IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use orinstallation, a charge will be made even if the appliance is under guarantee.